Green Corrosion Inhibitor for Electronics
S.K. Ujjain, P. Ahuja, R. Kanojia
Green corrosion inhibitors used for protection of metals and alloys in electronic devices are a key interest area for researcher because of increased environmental awareness which restrict the use of toxic and hazardous corrosion inhibitors which contaminate our ecological system. Advancement of green chemical technologies towards novel vapor-phase corrosion inhibitors (VPCI) as green inhibitors for electronics corrosion and their adsorption mechanism is discussed in detail here. Also, the protective role of VPCI for various metals and alloys used in electronics components and industrial applications are discussed.
Keywords
Green Corrosion Inhibitor, Vapor-Phase Corrosion Inhibitors, Electronics, Adsorption, Protective Film
Published online 11/3/2020, 29 pages
Citation: S.K. Ujjain, P. Ahuja, R. Kanojia, Green Corrosion Inhibitor for Electronics, Materials Research Foundations, Vol. 86, pp 204-232, 2021
DOI: https://doi.org/10.21741/9781644901052-8
Part of the book on Theory and Applications of Green Corrosion Inhibitors
References
[1] J. D. Gutten, Corrosion in electronic industry, Corros. 13 (1987) 1107-1112.
[2] B.A. Miksic, P.J. Martin, Proceedings of 6th European Symposium on Corrosion Inhibitors, Ferrara, Italy, 1985, pp. 941-950.
[3] J.S. Vimala, M. Natesan, S. Rajendran, Corrosion and protection of electronic components in different environmental conditions – an overview, The Open Corros. J. 2 (2009) 105-113. https://doi.org/10.2174/1876503300902010105
[4] W.H. Abbott, The Effects of Operating Environments on Electrical and Electronic Equipment Reliability in the Pulp and Paper Industry, presented at the IEEE Industry Applications Society 1983 Pulp and Paper Technical Conference, May 1983, IEEE Conference Record, New York, Institute of Electrical and Electronic Engineers, Inc, 1983.
[5] A. Al-Hashem, Atmospheric Corrosion Map of Kuwait for the Alloys of Carbon Steel, Copper and Galvanized Steel, presented at the 11th Middle East Corrosion Conference, Bahrain Society of Engineers & NACE International, 2006.
[6] P. L. Martin, Electronic Failure Analysis Handbook, Chapter 1: Overview of Electronic Component Reliability, McGraw- Hill, 1999.
[7] G.R. Lobley, R.D. Tems, Learning from Environmental Cracking Failures, Presented at the 11th Middle East Corrosion Conference, Bahrain Society of Engineers & NACE International, 2006.
[8] C.O. Muller, Multiple contaminant gas effects on electronic equipment corrosion, Corros. J. Sci. Eng. 47 (2) (1991) 146-151. https://doi.org/10.5006/1.3585230
[9] R.D. Tems, G.R. Lobley, S. Mehta, Corrosion of Electronic Control System in Gas Treating Environments, paper presented in NACE International Conference & Expo, Corros. (2007) 7401-7415
[10] R. Ambat, S.G. Jensen, P. Moller, Corrosion reliability of electronic systems, ECS Trans. 6 (2008) 17-28. https://doi.org/10.1149/1.2900650
[11] J. Henriksen, R. Hienonen, T. Imrell, C. Leygraf, L. Sjogren, Corrosion of Electronics: A Handbook Based on Experiences from a Nordic Research Project, Bulletin No. 102, Swedish Corrosion Institute, Stockholm, Sweden, 1991.
[12] G. Frankel, Corrosion of Microelectronic and Magnetic Data storage Devices in Corrosion Mechanisms in Theory and Practice, 3rd edition, ed. P. Marcus, CRC press/ Taylor & Francis Group, Boca Raton, 2012, pp. 825-861. https://doi.org/10.1201/b11020-20
[13] R.B. Comizzoli, R.P. Frankenthal, R.E. Lobnig, G.A. Peins, L.A. Psota-Kelty, D.J. Siconolfi, J.D. Sinclair, Corrosion of electronic materials and devices by submicron atmospheric particles, Electrochem. Soc. Interface 2(3) (1993) 26-34.
[14] D. Minzari, M.S. Jellesen, P. Moller, R. Ambat, On the electrochemical migration mechanism of tin in electronics, Corros. Sci. 53 (2013) 3366-3379. https://doi.org/10.1016/j.corsci.2011.06.015
[15] O.V. Elisseeva, A. Bruhn, J. Cerezo, A. Mavinkurve, R.T.H. Rongen, G.M. O’Halloren, R. Ambat, H. Terryn, J.M. Mol, Novel electrochemical approach to study mechanism of Al-Au wire- bond pad interconnections, Corros. Eng. Sci. Tech. 48 (2013) 409-417. https://doi.org/10.1179/1743278212Y.0000000067
[16] B.D. Dunn, C. Chandler, The corrosive effect of soldering fluxes and handling on some electronic materials, Welding Research Supplement, 1980, pp. 289-307.
[17] R.R. Tummala, E.J. Rymaszewski, Microelectronics Packaging Handbook, Van Nostrand Reinhold, New York, 1989. https://doi.org/10.1007/978-1-4613-1069-3
[18] T. Nguyen, C.A. Kovac, Moisture diffusion in electronic packages, SAMPE Electronic Materials & Processes Conferences, June 1987, pp. 574-589
[19] A. Subramanian, M. Natesan, V.S. Muralidharan, K. Balakrishnan, T. Vasudevan, An overview: vapor phase corrosion inhibitors, Corros. 56 (2) (2000) 144-155. https://doi.org/10.5006/1.3280530
[20] E. Vuorinen, E. Kálmán, W. Focke, Introduction to vapor phase corrosion inhibitors in metal packaging, Surf. Eng. 20 (4) (2004) 281-284. https://doi.org/10.1179/026708404225016481
[21] B.A. Miksic, A. Vignetti, Vapor Corrosion Inhibitors: Successful Field Applications in Electronics, NACE Corrosion Conference, March 2000, Orlando, 2000, 7.
[22] D. Bastidas, E. Cano, E. Mora, Volatile corrosion inhibitors: A review, AntiCorros. Meth. Mater. 52 (2005) 71–77. https://doi.org/10.1108/00035590510584771
[23] N.N. Andreev, Y.I. Kuznetsov, Physicochemical aspects of the action of volatile metal corrosion inhibitors, Russ. Chem. Rev. 74 (2005) 685–695. https://doi.org/10.1070/RC2005v074n08ABEH001162
[24] Y.I. Kuznetsov, Current state of the theory of metal corrosion inhibition, Prot. Met. 38 (2002) 103–111. https://doi.org/10.1023/A:1014904830050
[25] I. Rosenfeld, B. Persiantseva, P. Terentiev, Mechanism of metal protection by volatile inhibitors, Corros. 20 (1964) 222t–234t. https://doi.org/10.5006/0010-9312-20.7.222t
[26] J. Bastidas, B. Chico, M. Alonso, E. Mora, Corrosion of bronze by acetic and formic acid vapors, sulphur dioxide and sodium chloride particles, Mater. Corros. 46 (1995) 515–519. https://doi.org/10.1002/maco.19950460902
[27] A.I. Altsybeeva, V.V. Burlov, N.S. Fedorova, T.M. Kuzinova, G.F. Palatik, Volatile inhibitors of atmospheric corrosion of ferrous and nonferrous metals. I. Physical and chemical aspects of selection of starting reagents and synthetic routes, Int. J. Corros. Scale Inhib. 1(1) (2012) 51–64. https://doi.org/10.17675/2305-6894-2012-1-1-051-064
[28] A.I. Altsybeeva, V.V. Burlov, N.S. Fedorova, T.M. Kuzinova, G.F. Palatik, Volatile inhibitors of atmospheric corrosion of ferrous and nonferrous metals. II. Prediction of the efficiency of volatile inhibitors of atmospheric corrosion of steel (with Schiff and Mannich bases as examples), Int. J. Corros. Scale Inhib. 1(1) (2012) 99–106. https://doi.org/10.17675/2305-6894-2012-1-2-099-106
[29] M.E. Tarvin, B.A. Miksic, Volatile corrosion inhibitors for protection of electronics, Conference of National Association of Corrosion Engineers (NACE), 1989, 9.
[30] M.A. Quraishi, V. Bhardwaj, J. Rawat, Prevention of metallic corrosion by lauric hydrazide and its salts under vapor phase conditions, J. Am. Oil Chem. Soc. 79 (2002) 603–609. https://doi.org/10.1007/s11746-002-0530-6
[31] M.A. Quraishi, D. Jamal, V. Bhardwaj, Development and testing of new volatile corrosion inhibitors for multilmetal systems, Mater. Perform. 42 (2003) 44–48.
[32] J. Rawat, M.A. Quraishi, Influence of some 6-methoxy-aminobenzothiazole derivatives on corrosion of ferrous and nonferrous metals under vapor-phase conditions, Corros. 59 (2003) 238–241. https://doi.org/10.5006/1.3277556
[33] G. Gao, C. Liang, Some β-amino alcohols compounds as green volatile corrosion inhibitors for brass, J. Electrochem. Soc. 154 (2007) C144–C151. https://doi.org/10.1149/1.2405868
[34] M.A. Quraishi, D. Jamal, Inhibition of metals corrosion by a new vapor phase corrosion inhibitor, J. Metall. Mater. Sci. 47 (2005) 45–50.
[35] G. Gao, C.H. Liang, 1, 3-Bis-diethylamino-propan-2-ol as volatile corrosion inhibitor for brass, Corros. Sci. 49 (2007) 3479–3493. https://doi.org/10.1016/j.corsci.2007.03.030
[36] H. Amar, T. Braisaz, D. Villemin, B. Moreau, Thiomorpholin-4-ylmethylphosphonic acid and morpholin-4-methyl-phosphonic acid as corrosion inhibitors for carbon steel in natural seawater, Mater. Chem. Phys. 110 (2008) 1–6. https://doi.org/10.1016/j.matchemphys.2007.10.001
[37] E. Vuorinen, W. Skinner, Amine carboxylates as vapor phase corrosion inhibitors, Brit. Corros. J. 37 (2002) 159–160. https://doi.org/10.1179/000705902225002385
[38] M.A. Quraishi, F. Ansari, J. Rawat, Investigation of piperazine and its derivatives as vapor phase corrosion inhibitor for mild steel, Open Electrochem. J. 1 (2009) 32-36. https://doi.org/10.2174/1876505X00901010032
[39] N.N. Andreev, Y.I. Kuznetsov, Volatile inhibitors of metal corrosion. II. Interaction of systems being protected with the environment and corrosion prevention conditions, Int. J. Corros. Scale Inhib. 1 (2) (2012) 146–153. https://doi.org/10.17675/2305-6894-2012-1-2-146-153
[40] H. Kumar, V. Saini, V. Yadav, Study of vapor phase corrosion inhibitors for mild steel under different atmospheric conditions, Int. J. Eng. & Inn. Tech. 3(3) (2013) 206–211.
[41] A.I. Altsybeeva, V.V. Burlov, N.S. Fedorova, T.M. Kuzinova, Volatile inhibitors of atmospheric corrosion of ferrous and nonferrous metals. IV. Application of the VNKh-L-408 inhibitor in an electrostatic field, Int. J. Corros. Scale Inhib. 2 (3) (2013) 194–202. https://doi.org/10.17675/2305-6894-2013-2-3-194-202
[42] F. Ansari, M.A. Quraishi, Prevention of metallic corrosion by thiocarbohydrazides and their salts in vapor phase environment, Chem. Eng. Commun. 198 (2010) 61–72. https://doi.org/10.1080/00986445.2010.493120
[43] Sudheer, M.A. Quraishi, E.E. Ebenso, M. Natesan, Inhibition of atmospheric corrosion of mild steel by new green inhibitors under vapor phase condition, Int. J. Electrochem. Sci. 7 (2012) 7463–7475.
[44] D.Q. Zhang, L.X. Gao, G.D. Zhou, Self-assembled urea-amine compound as vapor phase corrosion inhibitor for mild steel, Surf. Coat. Technol. 204 (2010) 1646-1650. https://doi.org/10.1016/j.surfcoat.2009.10.054
[45] E. Cano, D. Bastidas, J. Simancas, J. Bastidas, Dicyclohexylamine nitrite as volatile corrosion inhibitor for steel in polluted environments, Corros. 61 (2005) 473–479. https://doi.org/10.5006/1.3280647
[46] A. Subramania, A.S. Priya, T. Vasudevan, Diethylamine phosphate as VPI for steel components, Mater. Chem. Phys. 100 (2006) 193–197. https://doi.org/10.1016/j.matchemphys.2005.12.030
[47] V. Saini, H. Kumar, Study of amine as vapor phase corrosion inhibitors for mild steel under different aggressive atmospheric conditions at high temperature, Int. J. Eng. Inn. Tech. 3 (2014) 248–256.
[48] M.A. Quraishi, D. Jamal, Synthesis and evaluation of some organic vapor phase corrosion inhibitors, Ind. J. Chem. Tech. 11 (2004) 459–464.
[49] P. Premkumar, K. Kannan, M. Natesan, Evaluation of menthol as vapor phase corrosion inhibitor for mild steel in NaCl environment, Ara. J. Sci. Eng. 34 (2009) 71-79.
[50] V. Saini, H. Kumar, DAA, 1-BIZ and 5-ATZ as vapor phase corrosion inhibitors for mild steel under different aggressive atmospheric conditions at high temperature, Int. Lett. Chem., Phys. Astron. 36 (2014) 174–192. https://doi.org/10.18052/www.scipress.com/ILCPA.36.174
