Controlled Uniform Load Cooling in Production Scale HIP Equipment

Controlled Uniform Load Cooling in Production Scale HIP Equipment

Beat Hofer, Michael Hamentgen, Maxime Pauwels, Carlo Verbraeken, Pierre Colman

Abstract. A HIP system with a useful volume of Ø 800 x 2500 mm will be presented. With the help of jet cooling, a cooling rate of 40°K/min. is achieved in the range of 1220°C to 850°C. The uniformity of temperature distribution is between +/- 5°K during cooling. It is possible to drive different cooling rates. The function of the system is described.

Keywords
HIP, SPM, EPSI, High Pressure Vessel, Frame, Heatshield, Radial Furnace, Mo-Heater, Thermocouple, Load, Temperature Accuracy, Cooling Parameter, Natural Cooling, Rapid Cooling, Jet Cooling, Controlled Cooling, Cooling Rate

Published online 2/11/2019, 12 pages
Copyright © 2019 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: Beat Hofer, Michael Hamentgen, Maxime Pauwels, Carlo Verbraeken, Pierre Colman, Controlled Uniform Load Cooling in Production Scale HIP Equipment, Materials Research Proceedings, Vol. 10, pp 157-168, 2019

DOI: https://dx.doi.org/10.21741/9781644900031-22

The article was published as article 22 of the book Hot Isostatic Pressing

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References