STAVAC is a manufacturer's sales agency specializing in High Vacuum Equipment, Instrumentation and Thin-Film Deposition Equipment.
STAVAC has been in business for 26 years and was founded in 1986 by Dave Stapleton. Mr. Stapleton graduated from Penn State University with a BS in Science and has worked as a manufacturers rep in this industry since 1984.
STAVAC specializes in high quality vacuum pumps, gauges, hardware, and thin-film deposition equipment. We represent only the leading companies in the industry and pride ourselves on long term relationships with our customers and principals. The mix of products we sell provides a wide variety of equipment and one stop shopping for all of our vacuum customers. STAVAC represent companies like Adixen by Pfeiffer Vacuum, Brooks Automations line of CTI Cryopumps, Granville-Phillips gauges, Pfeiffer Vacuum Products, Polycold Chillers, Advanced Energy plasma power supplies, JPSA precision lasers, TOHO thin film stress measurement tools, KLA Tencor stylus profilometers, Von Ardenne thin film deposition equipment.
T-M Vacuum Products, Inc. provides a wide selection of heat treating and thermal processing solutions. We provide various sizes of medical, sintering, continuous, tempering and high vacuum furnaces and ovens. We also offer vacuum brazing furnaces and ovens, optical coating systems, thin film disposition sputtering systems and atmospheric enclosures, commonly known as glove boxes.
We strive to create the best vacuum tempering furnaces and heat treating equipment possible which means high quality and cost effective products. Our systems typically exceed 20 years of life in a full-time 24/7 production environment. This means that each of the heat treating sintering, continuous, brazing, medical, high and tempering vacuum furnaces, high vacuum ovens, optical coating systems, thin film disposition sputtering systems and glove boxes you purchase from our company are the most advanced and cost effective on the market. This characteristic applies to all of our systems regardless of application or product specificity. Optical coating systems, thin film disposition sputtering systems and our glove box units all carry the same mark of quality that our furnace systems possess.
Products:
Vacuum Furnaces & Ovens
Thin Film Deposition
Glove Boxes
Not only we provide them with industrial solutions that are easy to maintain and with a high level of safety, but we also support them in technical education, equipment refurbishments and after-sales assistance.
We founded our company with the aim of providing a highly specialized and widespread global technical assistance service on vacuum technologies and heat treatment furnaces.
The experience of our team, engaged for decades in after-sales services and in the design of industrial solutions, has allowed us to combine a competent know-how with the manufacturing quality of our machinery. TAVENGINEERING operates and produces according to the AMS2750 standards, thus meeting the Nadcap compliance where required.
We are constantly active in research and development and oriented towards perfecting new technologies to make products (such as vacuum furnaces, water quenching furnaces, vacuum welding chambers, etc.) more reliable and efficient. From new industrial equipment to modernized one, from maintenance to training, we provide the best return on your investments.
24043 Caravaggio (BG)
We offer custom designed high temperature vacuum furnaces and components for applications including chemical vapor deposition and infiltration, sintering, de-binding, purification and graphitization. Whether your goal is bringing new materials to market or improving a current process, TevTech's expertise in high temperature vacuum furnaces will help to meet your goals.
In addition; we understand how important proper maintenance and support is for a high temperature vacuum furnace. To that end our furnace and subsystem designs will help you keep your equipment in production mode. We can help you in the field with specialized training, production layout, predictive maintenance, process control, and internal improvements.
TevTech has the skill and experience to help you scale a materials process from laboratory experiments to pilot-line and then to full scale production.
Products include:
Chemical Vapor Deposition & Infiltration
Carbon Processing
Laboratory Furnaces
Sintering Furnaces
Components & Subsystems
Thermic Edge Ltd is a design and manufacturing business with specialist knowledge of every kind of laboratory heating applications, from basic elements or sample heaters, to complete hot stages with rotation, manipulation and substrate bias. We have standard ranges of stand alone sample heaters and flange mounted sample heaters with feedthroughs incorporated. Our sample heaters and hot stages are used in a very wide range of laboratory applications including, PVD sputtering, thermal deposition, e-beam, CVD, MOCVD, PLD, ion beam implanters, carbon nanotubes and graphene growth.
Thermic Edge Ltd can offer a range of sample heater controllers to accurately control any kind of hot stage or sample heater. Heater controllers are fitted with Eurotherm PID temperature controllers as standard, but we can incorporate any type of controller that our customers might specify.
Thermic Edge Ltd also has a range of high temperature laboratory vacuum / inert atmosphere furnaces with graphite hot zones. These furnaces can heat a crucible or wafer to 2100C. All furnaces are plc controlled and are fully interlocked, with simple one button pump / vent operation. A choice of PID temperature controllers enables a high degree of control and programmable temperature ramping and cooling functions. Dual zone temperature control on flat wafer furnaces gives very high uniformity across the substrate.
We can offer a complete range of technical ceramic materials and components including Shapal, Macor, Alumina, Boron Nitride, Aluminium nitride and Quartz. We can also offer CVD produced ceramics such as pyrotytic boron nitride PBN and pyrolytic graphite.
ULVAC Technologies, Inc. was established in 1992 as the US subsidiary of ULVAC, Inc. Headquartered in Methuen, Massachusetts, ULVAC Technologies provides Sales and Services to all countries in Western Hemisphere. See our line of "Featured Products". In addition, this facility is equipped with a class-10 clean-room for process development, customer demonstration and manufacturing of the ENVIRO solvent-free dry photo resist stripper and Compound Semiconductor Materials Etch Systems. Other in-house services include Foundry Etch (for Deep Oxide and Compound Semiconductor materials), Thermal Processing, Materials Characterization, and Vacuum Pump/Leak Detector Repair.
ULVAC Technologies, Inc. has adopted the EU-RoHS Directives in response to rising environmental concerns regarding end of life disposal of electronic equipment and other hazardous substances. After reviewing these directives, we have determined that no elements of our ENVIRO family of products fall outside of the allowable limits of the EU-RoHS Directives.
While most ULVAC Technologies product elements do not fall within the categories covered by these directives, ULVAC Technologies and our suppliers recognize and value the protection of the environment afforded by regulations such as the EU-RoHS Directives. To that end, ULVAC Technologies recommends that end of life disposal be conducted in a manner suitable for the maximum protection of our environment.
R&D Products include:
Ashing Systems
Etching Systems
Laser Systems
Helium Leak Testing
Clean Sample high-speed heating and cooling
Seebeck Coefficient and Electrical Resistivity Measurements
Vacuum Pumps
Refurbished Systems
Since 1964, VG (VACGEN) has been the name synonymous with high quality ultra high vacuum products and services. From the manufacture of the first UHV valve to some of the most advanced vacuum research systems built, over 50 years in the research and scientific industry has given us an incredible grounding in the needs of our customers, how we can support new projects through the design phase, delivered product and ongoing support.
VACGEN remains the partner of choice for the next generation of researchers, innovators and builders. From our UK high tech manufacturing base, our focus is on delivering enabling technologies and supporting our customers across industry and academia.
Since 1964, VG (VACGEN) has been the name synonymous with high quality ultra high vacuum products and services. From the manufacture of the first UHV valve to some of the most advanced vacuum research systems built, over 50 years in the research and scientific industry has given us an incredible grounding in the needs of our customers, how we can support new projects through the design phase, delivered product and ongoing support.
VACGEN remains the partner of choice for the next generation of researchers, innovators and builders. From our UK high tech manufacturing base, our focus is on delivering enabling technologies and supporting our customers across industry and academia.
We develop and supply the complete spectrum of UHV components, from the most basic gaskets and flanges through to complex turnkey assemblies. As a UHV 'single source' the depth of knowledge and experience within our company ensures that your energy and passion can focus on the challenges of your project - safe in the knowledge that the UHV content will just work - and keep on working.
VACUUBRAND has a 50 year reputation as the innovative expert in vacuum for science. We serve three main communities of users:
Scientists in the laboratory who need individual vacuum pumps and pumping systems for research, education, quality control or scale-up programs.
Equipment and instrumentation manufacturers and integrators who need a vacuum pump as an essential component of their product.
Lab planners and designers who need an adaptable, energy-conserving, multi-user alterative to individual pumps, central vacuum systems and water aspirators.
VACUUBRAND, INC. is the North American affiliate of VACUUBRAND GMBH + CO KG of Germany. We support our US and Canadian customers with a factory-trained customer service and technical support staff, and provide fast delivery from stock at our corporate headquarters in Essex
Products include:
Diaphragm pumps
OEM- and built-in pumps
Rotary vane pumps and chemistry-HYBRID pumps
High-vacuum pumping units
Fluid aspiration systems
Vacuum gauges and controller
Local area vacuum network VACUU-LAND
Vacuum valves and small flange components
AVS Vacuum Furnace is manufactured to satisfy our customer's temperature and vacuum atmosphere requirements. AVS vacuum furnace allow various combinations of high temperatures up to 3000°C, high vacuum to 10-6torr, partial pressure gas atmospheres in the millitorr or torr ranges, and positive pressures up to 1 atmosphere (14.7 psig). AVS has in-house capabilities to fabricate graphite hot zones using soft felt or rigid g-board insulation, as well as non-particulate metal hot zones including stainless steel, nichrome, inconel, molybdenum or tungsten, when required.
AVS adherence to ASME codes allows AVS the confidence to offer the only standard 5 year chamber warranty in the industry. Vacuum furnace chambers are manufactured by certified AVS welders in our facility and, depending on requirements, can be fabricated from mild steel, 304 stainless steel or 316 stainless steel. The standard leak rate on an AVS vacuum chamber is 5µ/hour, but through the use of electro-polishing or with specialty coatings, can be fabricated to meet tighter specifications if required.
With the addition of a condenser system or hydrogen burn-off system, an AVS Vacuum Furnace can also allow for combination debinding and sintering. Debinding can be performed in positive pressures or partial pressures of flowing argon, nitrogen, hydrogen, or other inert or reactive gases or gas mixtures.
Vacuum Furnaces:
Sinter HIP Furnaces
Hot Press Furnaces
MIM Furnaces
CVD Furnaces
Hetherington Furnaces
Bell Style Furnaces
Debinding Furnaces
Zinc Reclaim Furnaces
Industrial Autoclaves
Custom Furnaces
